Steps to replace the front panel on a I-Core controller:STEP ONESTEP TWOTurn controller power off!With the controller's power off, open the face panel's door (similar to how the. Resetting I-Core. The Erase All feature will erase all of the controller's memory and set everything back to factory presets. Once you perform an Erase All, all
Change the dial to run and let the system turn on automatically. When you have checked the first station, you can manually shut the system off, or just let the time run out. Switch the dial back to “Manual One Station”, use the arrow buttons to select the next station, and repeat the process until you have inspected all stations.

Includes repairs, parts, labor and Transport; COVERAGE: Plan starts on the date of purchase. Drops, spills and cracked screens due to normal use covered for portable products and power surges covered from day one.

MANUAL SINGLE STATION 1. Turn dial to Manual Single Station position. 2. Press to select station. Use + or – to set manual run time. 3. Turn dial to RUN position to begin immediately. MANUAL PROGRAM 1. Turn dial to RUN position. 2. Press and hold button for three seconds. 3. Press PRG to select program. 4. Release button for two seconds. sprinkler timer to open only one zone. Then open the manual drainage valve at the end of this area (when equipped). Web3 X-CORE® COMPONENTS LCD Display 1 Run Times Allows user to set each valve station run time from 1 minute to 4 hours 2 Start Times Allows 1 to 4 start times to be set in The Hunter X-Core controller The X-Core 8-station outdoor irrigation controller is simple to install, operate, and maintain while delivering optimal efficiency and reliability. Offering 3 flexible irrigation programs with 4 start times each and run times up to 4 hours, the X-Core is the perfect solution for residential and light commercial . 993 197 435 480 49 552 918 361

hunter x core manual one station